Convertible Top Boot Vinyl 1994-2004

CJ's Part Number:
CTB12-V
Rating:
90% of 100
From
$292.99
Earn
points.
Only %1 left
Product Description

Vinyl Convertible Top Boot for all 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 and 2004 Convertible Mustangs.

Are you in the market for a new convertible top boot for your 1994-2004 Mustang? Replace your damaged or missing convertible top boot with this quality replacement today. This convertible top boot is designed to fit over the convertible top frame when the convertible top is in the lowered position. This boot covers your convertible top and will make your Mustang more aerodynamic while also protecting your top and headliner from unnecessary wind damage and ultraviolet rays.

Includes:
- Front Velcro for Installation
- Double Layer Vinyl
- Plastic Clips Around the Outer Edge
- Snap Studs
- Mounting Screws
- Detailed Instructions

This vinyl convertible top boot is designed to fit over the opening where the convertible top boot rest when it’s down. The Velcro gets mounted behind the rear seats of your Mustang. The double vinyl layer helps protect the vinyl convertible top boot from getting damaged. The plastic clips around the rear of the boot slides under the trim molding around the convertible frame. Mounting hardware is included with this top boot.

Since its introduction, the Mustang convertible has always been a popular option. However, after many years on the road, the Convertible Top on 1994-2004 Mustangs may need a few parts or complete replacement to keep protecting the interior on rainy days and to open properly when the weather is nice. CJ Pony Parts stocks plenty of parts to fix up or completely replace the convertible top on your Mustang, so you can keep enjoying it for years to come.

Purchase a new Vinyl Convertible Top Boot for all 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 and 2004 Convertible Mustangs from CJ Pony Parts today!

Related Categories: Mustang Parts, Mustang Convertible Top, Mustang Convertible Top Boots & Moldings

Installation & Fitment

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

We’re here with a convertible top boot, fitting all 1994 through 2004 mustangs.

This high quality convertible top boot is an excellent replacement for your missing or damaged '94 through '04 boot. It's available in all factory colors including: black, dark charcoal, dark red, saddle, and white.

While this convertible top boot is a replacement for your factory one, it doesn't install quite like the original. For starters, the very front edge of the boot includes this Velcro strip for installation. Moving further back it does have the same double layer of material over the top mechanism itself to protect the vinyl and them the edge does use the same plastic clips as the factory. The rest of it's going to be held on by screws that are included with it. I'm going to show you how they work.

The kit includes a complete set of snaps, studs, and screws to hold your convertible top boot on. These screws here are going to go across the back of your convertible top frame, basically behind the window, between the window and the trunk lid on the black trim panel. These will go on the quarter trim panel itself, then the snaps themselves will go in the convertible top boot and snap in place when installed. The kit also includes the necessary tool for installing the snaps.

Vehicle Fitment

This product will fit the following Mustang years:

Questions & Answers
Only registered users can ask/answer questions. Please sign in or create an account.
Reviews 6
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account