Ford Performance Crate Engine Boss 363 Cubic Inches 500HP Front Sump
Highlights
- 507 HP @ 6500 RPM
- 450 Lb. Ft. Torque @ 5100 RPM
- 302 Based Small Block Ford
- All Forged Internals
Ford Performance Front Sump 500 Horsepower 363 Cubic Inch Boss Crate Engine.
Look no further: the Boss 363 (M-6007-Z2363FT) from Ford Performance is the ultimate Ford 302-based small block. Five hundred horsepower from 363 cubic inches is no joke. All forged internals and motorsport-grade engineering makes it possible.
Features and Benefits:
- 507 HP/ 450 lb-ft Torque
- All Forged Internals
- Aluminum High-Flow Cylinder Heads
- Fully Assembled
The facts and figures speak for themselves. With a forged steel rotating assembly, performance-ground camshaft, aluminum Z2 heads and more, this engine is the top of Ford's 302 Windsor line.
Specifications:
- Engine type: 302 based small block Ford
- Displacement (cu in): 363
- Bore x stroke (in): 4.125" bore x 3.400" stroke
- Block: Boss 302 8.2 deck (M6010BOSS302)
- Crankshaft: SCAT Forged Steel
- Connecting rods: SCAT forged steel I-beam connecting rods and ARP® bolts
- Pistons: Forged Mahle w/ floating wrist pins
- Camshaft type: Hydraulic Roller
- Camshaft lift (in): .580"/.602"
- Camshaft duration (@.050 in): 232°/240°
- Cylinder Heads Ford Performance Aluminum "Z2" Cylinder Heads (M6049Z2)
- Valve size (in): 2.05" intake 1.60" exhaust
- Valve Springs: PAC 1219X Ovate Beehive
- Compression ratio: 10.2:1 (nominal)
- Rocker arms: Roller Rockers 1.65:1 Ratio
- Vibration Damper: Ford Performance SFI Approved
- Valve covers: Ford Racing cast aluminum (M302139)
- Oil pan: high performance 7 quart capacity and windage tray / scraper
- Water pump: Edelbrock hi-performance
- Includes Ford Performance (M9439A50) intake manifold gaskets
- Does not include distributor, intake and flywheel
- Required fuel: Premium unleaded
Please Note: This brand new Ford Performance crate engine does not include a distributor, intake or flywheel. Those parts must be purchased separately. This engine is also available as a Rear Sump (M6007Z2363RT).
California Residents: Proposition 65 Warning
Related Categories: Mustang Parts, Mustang Engine, Mustang Crate Engines & Cylinder Blocks, Ford Bronco Parts, Ford F-100 Parts
Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
- 1965 and older U.S. manufactured California certified vehicles
- 1967 and older U.S. manufactured federally certified vehicles
truck_freight_flat_product Vehicle Fitment
This product will fit the following Bronco years:
This product will fit the following F-100 years:
- 1948,
- 1949,
- 1950,
- 1951,
- 1952,
- 1953,
- 1954,
- 1955,
- 1956,
- 1957,
- 1958,
- 1959,
- 1960,
- 1961,
- 1962,
- 1963,
- 1964,
- 1965,
- 1966,
- 1967,
- 1968,
- 1969,
- 1970,
- 1971,
- 1972,
- 1973,
- 1974,
- 1975,
- 1976,
- 1977,
- 1978,
- 1979,
This product will fit the following Mustang years:
